Macro Ring Lite MR-14EX requires one of the following two types of batteries:

(1) Four AA-size alkaline batteries

(2) Four AA-size Ni-Cd batteries

Slide the battery compartment cover as shown by the arrow and flip it up Inset the batteries Make sure the + and - battery contract are properly oriented as shown in the battery chamber Close the battery chamber cover as shown in the diagram

• The minimum recycling time applies in the E-TTL or TTL mode while the maximum recycling time applies in the manual or full-output (1/1) mode
• The minimum flash count applies in the manual or full-output (1/1) mode

Battery Cautions

• Use four new batteries of the same type. When replacing batteries, replace all four batteries at one time.
• Although non-alkaline, manganese batteries may also be used, the number of flashes will be less
• Remove the batteries when the Macro Ring Lite MR-14EX will not be used for an extended period
• In low temperatures, take the two sets of batteries and keep one set warm in a pocket, etc and use the batteries alternately
• To prevent faulty connections, make sure the battery contacts are clean. If necessary, use a clean cloth to wipe the battery contracts
• AA-size lithium FR6 batteries and nickel-hydride can also be used. However, the shape of the Ni-Cd, lithium and nickel-hydride contacts is not standardized. Before buying these batteries, make sure the battery contact can touch the battery chamber's contact securely.