Sure Shot Z90W : How to load the film

Article ID: ART119988 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to load the film


Open the back cover

  • Push the lever down

Load the film

Position the film correctly between the film guides

Pull the film out to the marker (film leader position indicator)

  • Make sure that there is not slack in the film when you pull it out

Close the back cover

  • The film will automatically advance to the first picture on the roll

"1" is displayed in the frame counter

  • If the frame counter shows a blinking "0", the film did not load correctly. Load the film again



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments