Sure Shot AF35M II : How to load the film

Article ID: ART120340 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to load the film


Push the back cover opening latch in the directions of the arrow to open the back cover

Inset the upper, flat end of the cartridge into the film chamber first then lower the other end. The cartridge should be full seated not tipped upward.

Pull the film leader across the back so that its tip is aligned with the orange line in the lower right hand corner of the film chamber

Place the film between the film guides

Close the back cover

Press the shutter button several time until the frame counter reaches "1". If the frame counter moves, the film is being properly transported.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments