Ask a Question

Sure Shot AF35M II : Built-in flash ranges will vary, see chart.

Article ID: ART120343 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Built-in flash ranges will vary, see chart.

Solution

Switch to flash photography at the following times:

  • If the red viewfinder lamp appears when you press the shutter button halfway. In this case the flash will prevent the photo from being blurred and underexposed.
  • If the sun or a lamp is behind your subject
  • If there is a bright window at your subject's back
  • If your subject is in shadow

In the last three cases, the flash will prevent your subject from turning out too dark if it is within 3m (10ft).

  1. Push the flash switch in the direction of the arrow. The built-in flash will pop up
  2. Look into the viewfinder and compose the picture as you would for normal photography. Make sure the subject is within the auto flash shooting distance range.
  3. Wait for the flash-ready lamp to glow, then press the shutter button. If you take the shot before the flash-ready lamp glows, exposure will be incorrect

Flash range (ISO 100) 0.9 ~ 4.5m / 3 ~ 15ft

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments