Sure Shot Sprint / Sprint Quartz Date : How to load the film
| Article ID: ART120351 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
How to load the film
Solution
- Use DX coded film. The camera sets film speed upon sensing the film's DX code
- The camera sets film speeds of ISO 100 to 400
- For film without DX code, only use ISO 100 film
- If you use reversal film (slide film) use only ISO 100 or 400
- Use color or black and white negative film in standard 35mm cartridges. Load the film in subduded lighting only
 |
Press the back cover latch in the direction of the arrow to open the back cover |
 |
Insert the low protruding end of the film cartridge into the bottom of the film chamber first fitting the orange fork into the film shaft. Then swing the other end of the cartridge in. The cartridge should be fully seated not tipped forward.
Pull the film leader across the back of the camera and align the tip with the positioning mark in the lower right-hand corner of the film chamber. Make sure that the sprocket teeth are properly engaged with the film perforations and close the back cover.
|
