Sending a Document-ICMF 4270/MF4370dn/MF4350d/D480

Article ID: ART120600 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Follow this procedure to send faxes.


Sending a Document

Follow this procedure to send faxes.

  1. Set a document.

    Place the document on the platen glass or load it in the ADF.

  2. Enter the fax mode.

    Press <FAX>. The FAX indicator lights up and the machine enters the fax standby mode.

  3. Enter the fax number.

    Enter the fax number with the numeric keys. You can also specify the fax number with one-touch speed dialing key, coded speed dialing, or <Address Book> key.

    If you enter a wrong character, go back to the wrong with <>, then press <Clear> to delete it. Or press and hold <Clear> to delete the entire entry. Then try again.

  4. Send the document

    Press <Start>. When you set the document on the platen glass, press <START> for each document. When scanning is complete, press <OK> to start dialing.

    If you press <Stop/Reset> to cancel a job during scanning documents or after scanning documents, the [CANCEL DURING TX/RX?] message appears, press <> to select [YES].



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments