Using Coded Dial Codes
Follow the procedure below to send faxes to registered recipients using coded speed dialing codes. You can specify up to 100 recipients using coded speed dialing codes.

To use this feature, you must register recipients in coded speed dialing codes beforehand.
- Set documents.
Place the first page on the platen glass if you are not using the ADF.
- Press <FAX>.
- Press <Coded Dial>.
- Enter the desired two-digit code (00 to 99) with the numeric keys.

If you entered a wrong code, press <Stop/Reset>, then try again from step 3.
- Press <Start>.
When you set the document on the platen glass, press <Start> for each document. When scanning is complete, press <OK> to start sending.