Using Group Addresses-ICMF 4270/MF4370dn/MF4350d/D480

Article ID: ART120630 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Follow this procedure to send faxes to registered recipients using a Group Address.


Using Group Dialing

Follow the procedure below to send faxes to registered recipients using a group address.

To use this feature, you must register destinations in a group address beforehand.

  1. Set documents.
    Place the first page on the platen glass if you are not using the ADF.

  2. Press <FAX>.

  3. Press the one-touch speed dialing key under which the desired group dialing is registered.
    If you pressed a wrong key, press [Stop/Reset], and perform step 3 again.

  4. Press <Start>.
    When you set the document on the platen glass, press <Start> for each document. When scanning is complete, press <OK> to start sending.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments