Ask a Question

MT-24EX : How to activate the modeling light feature on the Speedlite.

Article ID: ART120674 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

How to activate the modeling light feature on the Speedlite.

Solution

Firing a modeling flash enables you to check the lighting and shadow effects before you take the picture.
  • The modeling flash is fired at 70 Hz for 1 sec.
Press the depth-of-field preview button
  • The modeling flash will fire according to the flash ratio that has been set.

! To prevent over heating and deterioration of the flash tubes, do not fire the modeling flash more than 10 times in succession. After 10 times allow the MR-14EX to cool for at least 10 minutes

C.Fn-6 can disable the modeling flash with flash ratio

C.Fn-4 can have the modeling flash fire at a uniform output with all Type-A cameras.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments