Use on DX-coded film. The camera automatically set the film speed, ISO 50 - 3200 according to DX code standard.
|
|
|
Slide the back cover latch down to open the back cover
|
Inset the flat end of the film cartridge in first
|
Carefully pull the film tip across only until it reaches the white line marked FILM
|
make sure that the film has no slack and close the back cover. The camera advances the film automatically and stops when "1" appears in the frame counter
- If the film does not advance correctly, three indicators will blink in the display panel to warn you that the film needs to be reloaded. The three indicators are, the frame counter, the film transport bark marks and the back cover indicator
- If non-DX-coded film is used, the film speed will be set to ISO 100. The film does not load automatically, press the shutter button until "1" appears in the frame counter
- For slide fim, use only ISO 50, 100, 200, 400, 800, 1600 or 3200
