Sure Shot Zoom S / Sure Shot Caption Zoom : How to load the film
Article ID: ART120957 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
How to load the film
Solution
|
Use only DX-coded film whenever possible. The camera automatically set the film speed. (ISO 50-3200 according to the DX code standard).
Slide the back cover latch down to open the back cover.
|
Insert the flat end of the film cartridge in first
Carefully pull the film tip across just until it reaches the white line marked "FILM"
Make sure that the film lies flash and close the back cover. The camera advances the film automatically and stops when "1" appears in the frame counter.
|
- If the film does not advance correctly, three indicators will blink in the display panel to warn you that the film needs to be reloaded. The three indicators are the frame counter, the film transport bars and the back cover indicator.
- If non DX-coded film is used, the film speed will be set to ISO 100. The film does not load automatically, press the shutter button until "1" appears in the frame counter
- For slide film, use only ISO 50, 100, 200, 400, 800, 1600 or 3200