Sure Shot NEW : How to load the film

Article ID: ART120973 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to load the film


Use only DX-coded film whenever possible. The camera automatically sets the film speed.

Films with speeds of ISO 50 ~ 1600 can be used with this camera. If film without a DX code is used, the camera automatically set the film speed to ISO 100

Slide the back cover latch down to open the back cover

Insert the flat end of the film cartridge in first

Carefully pull the film tip across until it matches up with the film mark.

Make sure that the film lies flat and close the back cover. The camera advances the film automatically and stops when "1" appears in the frame counter

  • If the film does not advance correctly "1" will not appear in the frame counter. If this occurs, open the back cover and reload the film
  • You can confirm whether or not film is loaded in the camera by looking through the film check window



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments