Ask a Question

580EX Speedlite : How to set the flash output for each receiver unit.

Article ID: ART121119 | Date published: 05/12/2015 | Date last updated: 11/29/2017
 

Description

How to set the flash output for each receiver unit.

Solution

Setting the flash output for each receiver unit

With manual flash and multiple Speedlites you can set a different flash output for each receiver unit

All settings are done with the sender unit

Press the <MODE> button so that <M> is displayed
Press the button so that <RATIO> blinks
Select the flash ratio
  • Turn the dial to select <A:B> or <A:B:C>, then press the button
Set the flash output
  • Press the button
  • The receiver ID <A> blinks
  • Turn the dial to set the flash output for <A>, then press the button
  • The receiver ID <B> will blink
  • Turn the dial to set the flash output for <B>, then press the button
  • The receiver ID <C> will blink
  • Turn the dial to set the flash output for <C>, then press the button
  • All the receiver IDs will light

 

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments