Manual flash or stroboscopic flash can be set manually with the receiver unit. Do this in the following cases
1. When you want to set the flash output with the receiver units individually for wireless flash as with studio flash units
2. When you use Speedlite Transmitter ST-E2 for wireless or manual flash
 |
Hold down the <MODE> button for 2 sec. or longer
<M> will blink
Set the manual flash output
|
| Hold down the <MODE> button for 2 sec. or more
<M> will blink
Press the <MODE> button again and <MULTI> will blink
Set the stroboscopic flash.
|
