T60 : How to manually adjust the exposure.

Article ID: ART121485 | Date published: 05/12/2015 | Date last updated: 08/17/2015


T60 : How to manually adjust the exposure.


In manual exposure mode, you can freely set the shutter speed and the aperture while confirming the exposure in the viewfinder.

Set the selector dial to one of the shutter speeds settings (1000 - 1)

Turn the aperture ring to set the desired aperture Look into the viewfinder and focus the subject

Press the shutter button halfway and check the viewfinder information display to confirm the exposure. Readjust the shutter speed and / or aperture settings if necessary

Press the shutter button completely to take the picture.

  • The exposure will be correct if "M" and the shutter speed set on the selector dial are lit. No other LEDs should be blinking.
  • If an LED is blinking the current shutter speed / aperture setting combination will result in an incorrect exposure



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments