T70 : How to load the film

Article ID: ART121588 | Date published: 05/12/2015 | Date last updated: 08/17/2015


T70 : How to load the film


  1. To open the back cover push the back cover latch down while pressing the back cover latch safety lock button in
  2. Place the film cartridge in the film chamber. A cartridge symbol will then appear on the display panel to indicate that film is loaded.

3. Pull out the film leader with your right hand while holding the camera and the film with your left hand to hold the camera steady

4. Make sure that (1) the film tip is aligned with the orange index and that (2) its perforations are properly engaged with the sprocket teeth

5. Close the back cover. The camera will advance the film automatically and stop when "1" appears in the frame counter brackets on the on the display panel. If the film is being correctly advanced, three bars will appear at the bottom of the display panel moving in sequence from left to right away from the film cartridge display symbol.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments