T80 : How to load the film

Article ID: ART121614 | Date published: 05/12/2015 | Date last updated: 08/17/2015


T80 : How to load the film


To open the back cover push the back cover latch down while pressing the back cover latch safety lock button in Place the film cartridge in the film chamber. A cartridge symbol will then appear on the display panel to indicate that the film is loaded Pull the film leader across the back of the camera until its tip is aligned with the orange index
Make sure that the film has no slack and that its perforations are properly engaged with the sprocket teeth Close the back cover. The camera will advance the film automatically and stop when "1" appears in the frame counter brackets on the display panel. If the film is being correctly advanced, three bars will appear at the bottom of the display panel moving in sequence from left to right away from the film cartridge display symbol



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments