Playing back still images taken with the DC220 or DC230 or DC50 DVD camcorders

Article ID: ART121792

Date published: 05/12/2015

Date last updated: 08/17/2015

Description

Solution

Viewing Still Images

Slide Show

Index Screen

Image Jump Function

Open the LCD panel.
Move the power switch to ON, then slide it down toward MODE and release it to set the camcorder in PLAY mode and slide the / switch to the (STILLS) position.
If necessary, change the media for the still images using the procedure described in Selecting the Media for the Still Images below.
- You can show the still images on the memory card or the disc. The default media for still images is the memory card.
- As long as you do not change the media selection, the camcorder will show the still images recorded on the media that was selected last.
Use the joystick () to move between images.

Slide Show

Press the <FUNC.> button.
Use the joystick (,) to select [SLIDE SHOW] and press () to make the selection.
Use the omni selector () to select [START] and press () to start the slideshow.
- Images are played back one after another.
- Press the <FUNC.> button to stop the slide show.

Index Screen

Move the zoom lever toward W.
- The stills index screen appears with the first six still images.
Use the joystick (,) to select an image.
- Move the green selection frame to the image you wish to view.
- If you have a lot of still images, you may find it easier to browse entire index pages instead. Move the zoom lever toward W to extend the green selection frame to the whole page, and move () between index pages.
Move the zoom lever toward T.
- The index screen closes and the selected image is displayed.

Image Jump Function

You can also quickly locate a specific image without having to browse all of them one by one. The number in the upper right of the screen indicates the number of the current image out of the total number of images.

Push the omni selector () and keep it pressed down.
Image numbers will quickly run in sequence. When you release the omni selector the image corresponding to the number selected will be displayed.

The following may not be displayed correctly: Images not recorded with this camcorder, images edited on or uploaded from a computer (except for the sample images for the Card Mix function), and images whose file names have been changed.
Do not turn off the camcorder, change the position of the / switch, disconnect the power source, open the memory card/disc cover or remove the memory card/disc while the card access or the disc access indicator is flashing. Doing so could result in data damage.

Selecting the Media for the Still Images

You can record still images on the memory card or the disc. The default media for still images is the memory card.

Press the <FUNC.> button. Using the joystick (,) select the [] icon and press () to open the setup menus.
Select (,) [SYSTEM SETUP] and press ().
Using the joystick (,) select the [Media Sel. ] option and press ().
Using the joystick (,) change the setting to [DISC] or [CARD] and press () to save the selection and close the menu.
- When recording, the operating mode symbol will change to (DISC STILLS) or (CARD STILLS), depending on the media selected. In playback mode, the operating mode symbol will change to (DISC STILLS) or (CARD STILLS), respectively.