Sure Shot Tele Max : Checking the battery level status
Article ID: ART122125 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Checking the battery level status

Solution

Checking the battery
  1. Open the lens cover (this turns the power on) by sliding the lens cover open/close switch in the direction shown, and the lens movers out to the ready position.
  2. Set the shooting mode switch to FLASH-ON and press the shutter button completely to fire the flash
  3. Remove your finger only from the shutter button and wait for seven (7) seconds
  4. The press the shutter button again and the battery power is sufficient if the flash fires
  • Check the battery before loading the film

Battery Capacity

Approximately 15 rolls of 24-exp with 50% flash use.

SIMS Doc Id

0