Attaching the Bluetooth unit to the printer - iP90

Article ID: ART122264 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Attach the Bluetooth Unit to the Printer

Attach the Bluetooth unit to the printer in accordance with the following procedures:

  1. Power the printer off.

    Note: Do not attach the Bluetooth unit while the printer is powered on. Doing so may damage the printer.

  2. On a flat surface, sit the printer on its back end (vertically), and open the print head cover *.

  3. Insert the Bluetooth unit to the Bluetooth unit connector.

    * Insert the unit until its face plate aligns with this point.

    Note: The small plastic shim that is included in the BU-10 package is not used for this model.

  4. Close the print head cover.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments