Loading paper in the MP610 cassette
Article ID: ART122648 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
Loading paper in the cassette.
Solution
Follow this procedure to load paper / envelope in the cassette:
-
Pull out the cassette from the machine.
-
Remove the cover from the cassette.
-
Fan out the sheets of paper so that they do not stick together.
-
Align the edges of the paper.
-
If the cassette is not yet extended, use your thumb to press the tab (indicated by the pink circular outline) and release the latch.
-
After the latch is released, remove your thumb from the tab. Then extend the cassette until a click is heard.
-
Load paper on the upper-right corner of the cassette with the print side facing down.
Do not load higher than the Load Limit Mark (A).
(1) Load the paper in the Cassette with the print side facing DOWN and the leading edge to the far side.
(2) Align the paper stack against the right side of the Cassette.
(3) Slide the Paper Guides to fit to the loaded paper stack.
-
Close the lid and push the cassette all the way into the printer.
-
Prepare the Paper Output Tray.
(1) Open the Paper Output Tray.
Put your finger in the rounded indent of the Paper Output Tray and open it gently.
(2) Open the Output Tray Extension.
(3) Press the Paper Feed Switch so that the Cassette lamp(B) lights.
- Press down firmly on the edges of the envelopes to make the folds crisp. Also, press firmly on the area that corresponds to the edges of the back flap.
- Remove any curling by holding the edges diagonally and bending them gently.
- If the edges of the envelope are inflated or are curling, place the envelope on a flat surface. With a pen, press down while moving it from the center toward the edges of the envelope.
- Ensure that no curl or puff exceeds 1/8 in. (3 mm).
-
Load envelopes in the cassette with the print side facing down and the flap towards the left.
(A) Make sure the flaps are folded.
(1) Align the envelope stack against the right side of the Cassette.
Load with the address side facing DOWN. The flap of the envelope will appear facing UP on the left side.
Up to 5 envelopes can be loaded at once.
(2) Slide the Paper Guides against the sides of the envelope.
(3) Press the Paper Feed Switch so that the Cassette lamp lights up.