LC-2 Wireless Controller : How to set the communication channel on the transmitter.

Article ID: ART122845 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to set the communication channel on the transmitter.


Set the transmitter and the receiver to the same channel - if the transmitter is set to Ch. A, the receiver must be set to Ch. A too. Otherwise correct operation of the Wireless Controller LC-2 is not possible

If you want to control two cameras onto which two separate receivers are mounted in series rather then simultaneously, with on transmitter, set each receiver to a different channel - one must be set to Ch. A and the other to Ch. B - and change the channel on the transmitter in succession

If you use two separate sets of the Wireless Controllers LC-2 in the same field, make sure that each is set to a different channel

When you try to control one camera with plural transmitters, there is a possibility that the Wireless Controller LC-2 may not function if you press the transmitter at the same time



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments