Read / Write Attribute - MX700

1. Display the Read/write attribute screen.

(1) Make sure that the memory card is not set.

If the memory card is set, remove it from the Card Slot.

(2) Press the Menu button.

(3) Press the or button to select Maintenance/settings and then press the OK button. }

(4) Press the or button to select Device settings and then press the OK button.

(5) Press the or button to select Other settings and then press the OK button.

(6) Press the or button to select Read/write attribute and then press the OK button.

2. Specify the read/write attribute.

(1) Specify Read/write attribute.

	USB enabled:		The Card Slot is used as the memory card drive of a USB-connected computer only. Photo data can be read from or written into the memory card.
	LAN enabled:		The Card Slot is used as the memory card drive of a LAN-connected computer only. Photo data can be read from or written into the memory card.
	Read-only mode:		The Card Slot is used only for reading via USB and over a network. Be sure to select this mode when printing photos from a memory card.

(2) Press the OK button.

Important If you used the Card Slot as the memory card drive of the computer, you need to do a "safe removal" operation on your computer before physically removing the memory card from your machine. Removing the memory card or turning off the machine while the Access lamp is flashing may damage the data saved in the memory card. Via USB: Right-click the removable disk icon and click Eject. If Eject is not displayed on the screen, confirm that the Access lamp is not flashing and remove the memory card. Over a network: The removal operation is not needed. Drag the icon into the Trash.