How to connect the PowerShot SD950 IS to a computer.
Article ID: ART123209 | | | Date published: 05/12/2015 | | | Date last updated: 08/17/2015 |
Description
How to connect the PowerShot SD950 IS to a computer.
Solution
Connect the camera to your computer with the dedicated USB cable so that they can communicate. You can connect the camera while your computer is running.
- When you connect the camera to your computer, be sure to follow the procedure below.
-
Never perform the following operations while the software installed from the SOLUTION DISK is running after connecting the camera to the computer, as a communications error may occur:
- Turn the camera OFF.
- Open the memory card/battery slot cover.
- Disconnect the dedicated USB cable or remove the battery.
- Disconnect the DC coupler (optional) or unplug the AC adapter (optional) or power cord.
Before you perform the operations below, be sure to exit the software being used.
-
Plug the dedicated USB cable into the computer.
- Plug the cable into the USB port on the computer.
- The location of the port differs depending on your computer. Refer to the User's Manual for your computer for details.
-
Plug the dedicated USB cable into your camera.
- Open the cover and plug the cable connector into the <DIGITAL> terminal and make sure it is plugged in all of the way.
- Open the cover and plug the cable connector into the <DIGITAL> terminal and make sure it is plugged in all of the way.
- Turn on the camera in the
(Playback mode) by pressing the
(Playback) button on the back of the camera.
-
The PowerShot SD950 IS screen (event screen) or the Scanner and Camera Wizard dialog box appear.
|
SIMS Doc Id
0