Ask a Question

430EX Speedlite : How to set manual flash with the receiver unit.

Article ID: ART123277 | Date published: 05/12/2015 | Date last updated: 11/21/2017
 

Description

How to set manual flash with the receiver unit.

Solution

Manual flash can be set manually with the receiver unit. Do this in the following cases:

1) When you want to set the flash output with the receiver units

2) When you use Speedlite Transmitter ST-E2 for wireless or manual flash

  • Press the <MODE> button for 2 sec.
  • <M> will blink
  • Set the manual flash output

  • Set the flash output

    • Press the button
    • then flash output display will blink
    • press the button to set the flash output, then press the button
    • Press the shutter button halfway down to see the effective flash range

 

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments