Sending a fax Overseas (from the U.S.)

Follow these steps to send a document Overseas (from the U.S.).

1. Set a document.
   
   Place the document on the platen glass or load it in the ADF.
   
   
   
2. Enter the fax mode.
   
   Press <FAX>. The FAX indicator lights and the machine enters fax standby mode.
   
   
   
3. Using the numeric keys, enter "011".
   
   For additional details on international access codes (or codes other than the U.S.) contact your local telephone company.
   
   
   If you enter a wrong number, go back to the wrong digit with <>, then press <Clear> to delete it. Or press and hold <Clear> to delete the entire entry. Then try again.
   
   
   
4. If necessary, press <Redial/Pause> to enter a two-second pause [P].
   
   
   
5. Use the numeric keys to dial the country code, the area code, and the fax/telephone number of the other party.
   
   For additional details on international codes, contact your local telephone company.
   
   
   
6. Send the document
   
   Press <Start>. When you set the document on the platen glass, press [Start] for each document. When scanning is complete, press [OK].
   If <CONFIRM NEW DEST.> is set to <ON> in the <TX SETTINGS> of the <FAX SETTINGS> menu, you need to enter the fax number again after pressing [Start].
   
   
   If you press <Stop/Reset> to cancel a job during scanning documents or after scanning documents, the [CANCEL DURING TX/RX?] message appears. Press <> to select [Yes]. The job is canceled, and the display returns to standby mode.