Confirm the ink tank(s) are properly installed iP3500

Article ID: ART123309 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Confirm the ink tank(s) are properly installed


Untitled Document

Ensure that the ink tank is installed properly.

Open the Top Cover, Paper Output Tray and Inner Cover, and then press on the 'PUSH' mark on the ink tank whose lamp is off until the ink tank clicks into place. Once the ink tank is installed properly its lamp will light red.

Ensure that all the orange tape has been peeled off as shown in (1). If a part of the orange tape remains as shown in (2), remove it completely.

(1) Correct (An L-shaped notch* appears on the ink tank.)

(2) Incorrect (Orange tape remains. Peel off the tape along the perforation.)

Replace any incompatible tanks with the correct tanks

Ink tanks used by the printer:

Black (PGI-5BK)

Cyan (CLI-8C)

Magenta (CLI-8M)

Yellow (CLI-8Y)



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments