Using Useful Copy Functions

Special Copy

You can copy in various layouts.

Copying Thick Originals Such as Books (FRAME ERASE)

Copying on Stickers (STICKER COPY)

Copying without Borders (BORDERLESS COPY)

Repeating an Image on a Page (IMAGE REPEAT)

Copying Two Pages to Fit onto a Single Page (2-ON-1)

Copying Four Pages to Fit onto a Single Page (4-ON-1)

Making Multiple Copies of an Entire Document (COLLATED COPY)

1. Prepare for copying.

(1) Turn on the machine.

(2) Press the COPY button.

(3) Load paper.

(4) Load the original on the Platen Glass or the ADF.

2. Select the copy menu.

(1) Press the Menu button.

Note To cancel Special copy settings, press the Stop/Reset button in the SPECIAL COPY menu. If the number of copies or the intensity has been set already, press the Stop/Reset button twice.

Copying Thick Originals Such as Books (FRAME ERASE)

When copying a thick original document such as books, you can copy without black margins around the image. Using this function, you can reduce unnecessary ink consumption.

1 Press the or button to select FRAME ERASE, then press the OK button.

2 Press the or button, or the Numeric buttons to specify the number of copies.

3 Adjust the settings for your document as necessary.

4 Press the Color button for color copying, or press the Black button for black & white copying.

Note Load the document on the Platen Glass when using this function. Close the Document Cover. There may be a narrow black margin that appears around the image. This function removes the dark margins only. If a scanned book is too thin or when the machine is used nearby a window or in a bright environment, a faint black frame may remain. Also, if the color of an original is dark, the machine cannot distinguish the document color from the shadow and this may cause slight cropping.

Copying on Stickers (STICKER COPY)

You can easily make 16 stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon sticker paper.

(A) Platen Glass (Place document face down)

(B) 16 stickers

1. Press the or button to select STICKER COPY, then press the OK button.

2. Make sure that 4 x 4 is selected, then press the OK button.

Note You can only select 4 x 4 though other layouts appear on the LCD.

3. Press the or button, or the Numeric buttons to specify the number of copies.

4. Press the Color button for color copying, or press the Black button for black & white copying.

Note Load the document on the Platen Glass when using this function. You can only load one sheet of stickers at a time in the Rear Tray. You cannot specify the settings other than intensity.

Copying without Borders (BORDERLESS COPY)

You can copy images so that they fill the entire page without borders.

1. Press the or button to select BORDERLESS COPY, then press the OK button.

If a media type setting is selected that cannot be used in borderless copying, the LCD displays the following message.

Press the or button to select the page size, then press the OK button.

8.5x11 / A4 / 4x6 / 5x7 / C-CARD

Press the or button to select the media type, then press the OK button.
PHOTO PRO / PHOTO PLUS / MATT PHOTO / GLOSSY

2. Press the or button, or the Numeric buttons to specify the number of copies.

3. Adjust the settings for your document as necessary.

4. Press the Color button for color copying, or press the Black button for black & white copying.

Note Load the document on the Platen Glass when using this function. Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.

Repeating an Image on a Page (IMAGE REPEAT)

You can copy an image multiple times onto a single page. You can set the machine to automatically select the number of times it repeats the image, or you can specify the number.

1 . Press the or button to select IMAGE REPEAT, then press the OK button.

2. Press the or button to select AUTO or MANUAL, then press the OK button.

If you selected AUTO, proceed to step 5.

If you selected MANUAL, proceed to step 3.

Note When AUTO is selected, the document loaded in the ADF cannot be scanned.

3. Press the or button to set the vertical repeats, then press the OK button.

4. Press the or button to set the horizontal repeats, then press the OK button.

5. Press the or button, or the Numeric buttons to specify the number of copies.

6. Adjust the settings for your document as necessary.

7. Press the Color button for color copying, or press the Black button for black & white copying.

Important The area scanned from the original depends on the enlargement/reduction setting.

Note CREDIT CARD SIZE cannot be selected for the paper. FIT-TO-PAGE cannot be selected for the enlargement/reduction ratio.

Copying Two Pages to Fit onto a Single Page (2-ON-1)

You can copy two original pages (A) (B) onto a single sheet of paper (C) by reducing each image.

1. Press the or button to select 2-ON-1, then press the OK button.

2. Press the or button, or the Numeric buttons to specify the number of copies.

3. Adjust the settings for your document as necessary.

Note You cannot specify ENLARGE/REDUCE.

4. Press the Color button for color copying, or press the Black button for black & white copying.

When the document was loaded on the Platen Glass:

When the first sheet of document finishes to be scanned, the message below is displayed.

If you have another sheet of document to scan, load it on the Platen Glass and press the same button (the Black or Color button) as the first operation.

If you do not need more scanning, press the OK button.

When the document was loaded in the ADF:

The machine starts scanning in the next sheet of document automatically after one sheet of document is scanned in.

Note If "MEMORY IS FULL" appears on the LCD when scanning, set the image quality to STANDARD and try copying. If the problem is not resolved, set the print quality to FAST and try copying again.

Copying Four Pages to Fit onto a Single Page (4-ON-1)

You can copy four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.

(A) Documents

(B) PATTERN 1

(C)PATTERN 2

(D) PATTERN 3

(E) PATTERN 4

1. Press the or button to select 4-ON-1, then press the OK button.

2. Press the or button to specify the layout pattern, then press the OK button.

You can select PATTERN 1, PATTERN 2, PATTERN 3, or PATTERN 4.

3. Press the or button, or the Numeric buttons to specify the number of copies.

4. Adjust the settings for your document as necessary.

Note You cannot select ENLARGE/REDUCE.

5. Press the Color button for color copying, or press the Black button for black & white copying.

When the document was loaded on the Platen Glass:

When each sheet, from the first to third sheet of document, finishes to be scanned, the message below is displayed.

If you have another sheet of document to scan, load it on the Platen Glass and press the same button (the Black or Color button) as the first operation.

If you do not need more scanning, press the OK button.

When the document was loaded in the ADF:

The machine starts scanning in the next sheet of document automatically after one sheet of document is scanned in.

Note If "MEMORY IS FULL" appears on the LCD when scanning, set the image quality to STANDARD and try copying. If the problem is not resolved, set the print quality to FAST and try copying again.

Making Multiple Copies of an Entire Document (COLLATED COPY)

You can obtain sorted printouts when making multiple copies of a multi-paged original.

(A) Documents

(B) COLLATED COPY selected

(C) COLLATED COPY not selected

(D) Copy 1

(E) Copy 2

(F) Copy 3

1. Press the or button to select COLLATED COPY, then press the OK button.

2. Press the or button, or the Numeric buttons to specify the number of copies.

3. Adjust the settings for your document as necessary.

Note You cannot select FIT-TO-PAGE as the copy ratio and AUTO ADJUST (A) as the intensity.

4. Press the Color button for color copying, or press the Black button for black & white copying.

Note Load the document in the ADF when using this function. Using this function might cause a reduction in print quality. For best results, print without using collation. The number of sheets you can load depends on the document type. If "MEMORY IS FULL" appears on the LCD when scanning, reduce the number of sheets and load them again.