EOS 700 : How to reverse (flip) the command dial plate.

Article ID: ART123588 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to reverse (flip) the command dial plate


By reversing the dial plate with the B side facing up, you can operate the camera in Shutter Priority AE, "B" Bulb (long exposure) mode or "P" Program mode and still have access to the self-timer and battery check functions

  1. While holding the outside of the dial as shown in the illustration use the ball of you finger to loosen the dial screw by turning it counterclockwise. Remove the screw
  2. Turn the dial plate over and place it back so it aligns with the groove. Replace and tighten the screw by turning clockwise
  • If the dial screw is difficult to loosen, use the cloth part of the strap to loosen the screw as illustrated
  • After reversing the dial plate be sure to tighten the screw securely to ensure proper camera operation



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments