EOS 10s : How to set exposure compensation

Article ID: ART123722 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to set exposure compensation


Use exposure compensation for intentionally underexposed or overexposed pictures. The compensation range is up to +/- 5 stops in half-stop increments. This cannot be set if the command dial is at the green zone, P.I.C. or barcode setting

  1. Press the +/- (black) button to display the +/- exposure compensation symbol in the LCD panel. The symbol appears for six seconds
  2. Turn the electronic input dial to set the desired value
  • Exposure compensation remains active until canceled
  • To cancel exposure compensation, repeat steps #1 & 2 above and return the value to 0.0
  • The +/- symbol indicating exposure compensation status appears only in the LCD panel. Press the +/- button to display the value set



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments