Borderless printing ( with roll paper width) Windows

Article ID: ART123815 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Borderless printing ( with roll paper width) Windows

*Borderless printing is only available with rolls.

Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.

This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following example.

Document: Any type
Page size: A4 (210.0x297.0 mm)/Letter (8.3 x 11.7 in)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)

  1. In the application, create an original that takes up the entire space of the paper size.
    *If you can specify the margin, as in Microsoft Word, set the margin at 0 mm.
    For instructions on specifying the margin, refer to the software documentation.
  2. Choose Print in the application menu.
  3. Select the printer in the dialog box, and then display the printer driver dialog box.
  4. Make sure the Main sheet is displayed
  5. In the "A":Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper .
  6. Select the print target in the "E":Print Target list.
  7. Click the Page Setup tab to display the Page Setup sheet.
  8. In the "A":Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 .
  9. Click Roll Paper in the "L":Media Source list.
  10. Select the "B":Borderless Printing check box to display the Information dialog box.
  11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm) .
  12. Click OK to close the Information dialog box.
  13. In "C":Borderless Printing Method , make sure "E":Scale to fit Roll Paper Width is selected.
  14. Confirm the print settings and print as desired.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments