Borderless printing (with actual size) MacOS9

*Borderless printing is only available with rolls.

Print Image with Actual Size

• Prints originals at actual size, without enlarging or reducing them.
  Originals must be prepared in a size that exceeds the dimensions of the paper by 3 mm (0.12 in) on each side.
  

This topic describes how to print borderlessly at actual size based on the following example.

Document: Any type
Page size: 10 x 12 inches (254.0x304.8 mm)-Borderless
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll width: 10 inches (254.0 mm)

1. Select the printer in Chooser .
2. Choose Page Setup from the application menu to display the Page Attribute dialog box.
   
3. In "D":Print Area Setting , click "H":For Broderless Printing .
4. In the "A":Page Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Borderless .
   *Paper sizes supported for borderless printing are indicated by "-Borderless."
5. Click "I":OK to close the dialog box.
6. In the application, create an original that takes up the entire space of the paper size.
7. Choose Print in the application menu.
8. Make sure the Main pane is displayed.
   
9. In the "C":Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper .
10. Select the print target in the "F":Print Target list.
11. Access the Finishing pane.
    
12. Click Roll Paper in the "A":Media Source list.
13. Confirm that the roll paper width matches the paper size.
    Make sure the width of the loaded roll is displayed in the "B":Roll Paper Width list—in this case, 10 in. (254.0mm) .
14. Access the Page Setup pane.
    
15. Make sure the "B":Page Size setting matches the original size as selected in "A":Page Size in the Page Attribute dialog box—in this case, 10"x12" .
    
16. Confirm the print settings, and click "N":Print to start printing.