Print with specified magnification (Enlarged/reduced) Windows

Article ID: ART123830 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Print with specified magnification (Enlarged/reduced) Windows

Enlarge or reduce originals by a particular amount, as desired.

*In borderless printing, you cannot resize originals by entering a scaling value.


This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example.

Document: Any type
Page size: A4 (210.0x297.0 mm)/Letter (8.3 x 11.7 in)
Paper: Roll
Paper type: Plain Paper
Roll paperr width: A2/A3 roll (420.0 mm [16.5 in])

  1. Choose Print in the application menu.
  2. Select the printer in the dialog box, and then display the printer driver dialog box.
  3. Make sure the Main sheet is displayed.
  4. In the "A":Media Type list, select the type of paper that is loaded. In this case, click Plain Paper .
  5. Select the print target in the "E":Print Target list.
  6. Click the Page Setup tab to display the Page Setup sheet.
  7. Click Roll Paper in the "L":Media Source list.
  8. Select the width of the loaded roll in the "M":Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm) .
  9. In the "A":Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 .
  10. Select the "C":Enlarged/Reduced Printing check box.
  11. Click ISO A4 in the "G":Media Size list.
  12. Click "F":Scaling and enter "120."
  13. Confirm the print settings and print as desired.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments