Loading Documents(MF 4000 Series/D480)

Article ID: ART123862 | Date published: 05/12/2015 | Date last updated: 08/17/2015


This is the proper way to load your original documents in this unit.


Loading Documents

In the ADF

On the Platen Glass:

  1. Lift up the ADF.

  2. Place your document face down.

  3. Align the document with the appropriate paper size marks.

    If your document does not match any of the paper size marks, align the center of the document with the arrow mark.

  4. Gently close the ADF.

    The document is ready for scanning.

    - When closing the platen glass cover, be careful not to get your fingers caught, as this may result in personal injury.
    - Do not press down the platen glass cover forcefully, as this may damage the platen glass and cause personal injury.

    Remove the document from the platen glass when scanning is complete.


In the ADF:

  1. Fan the document stack and even the edges.

  2. Adjust the slide guides to the width of the documents.

  3. Neatly place the documents face up in the document feeder tray.

    The document is ready for scanning.

    - Do not add or remove documents while they are being scanned.
    - When scanning is complete, remove the documents from the document delivery tray to avoid paper jams.
    - Avoid using ADF to scan the same document more than 30 times. When scanned repeatedly, documents can become folded or torn, which may cause paper jams.
    - If the feeder rollers are soiled from scanning a document written in pencil, clean them.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments