Installing the Toner Cartridge-ICMF 4000 Series

Article ID: ART123888 | Date published: 05/12/2015 | Date last updated: 08/17/2015


To install the toner cartridge, follow these steps.


Installing the Toner Cartridge

  1. Remove the toner cartridge from the bag.
    Keep the bag for future use.

    Do not open the drum protective shutter (A).

  2. Gently rock the toner cartridge several times to distribute toner inside.

  3. Pull out the seal completely.

    Do not pull out the seal at an angle.

  4. Lift the scanning platform (A) until it is locked. (You will hear an audible "click.")

  5. Open the toner cover (B), using the grip (A) on the right front side of the toner cover.

  6. Hold the toner cartridge by its handle (A).

  7. Insert the cartridge so that the protrusion on the right side of the toner cartridge (A) fits into the guide (B) located on the right side of the machine and slide it down parallel to the guide.

  8. Push the toner cartridge to make sure it is properly set in the machine.

  9. Close the toner cover using the grip.

  10. Close the scanning platform.

    - Be careful not to get your fingers caught.
    - If you cannot close the toner cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments