How to reseat the print head

1. Check that the printer is powered on, and open the front cover. The print head will move to the the left from the right.

2. After confirming the print head moves to the left, press and hold the <Resume/Cancel> button for more than 2 seconds. The print head will move to the center.

3. Hold and slowly move the print head lock lever up and down several times.

Caution: Avoid touching the print head during this operation.

Raise the print head lock lever firmly.

3. Firmly lower the print head lock lever to secure the print head.

Note: Holding the print head may cause it to not be seated properly. Perform this step using only the print head lock lever.

4. Close the front cover.