Recording Movies on a Memory Card ZR600/700
Recording from a Tape in the Camcorder
Screen Displays during Movie Recording
You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie recorded on a memory card will be monaural.
- Set the <TAPE/CARD> switch to <CARD>.
- Press the start/stop button to begin recording.
- Press the start/stop button to stop recording.
- Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. Doing so could result in data damage.
- When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.
- Do not load/unload a cassette during recording.
|
- We recommend using a Canon SD Memory Card, or a SD Memory Card with a transfer rate of more than 2 MB/sec., right after you have formatted it with this camcorder. With memory cards not formatted with this camcorder, or when recording/erasing has been repeatedly performed, the writing speed may be lower and recording may stop.
- You can select the focusing point when recording a movie on the memory card.
- Users of Windows XP: When you plan to connect the camcorder to a computer, keep the length of one movie shorter than approx. 12 min. in 320 x 240 and 35 min. in 160 x 120.
|
Recording from a Tape in the Camcorder
- Play back the tape.
- Press the start/stop button when the scene you wish to record appears.
- Press the start/stop button to stop recording.
- When recording from a tape in the camcorder or other video devices:
-
- A movie recorded from an image in widescreen mode will be vertically compressed.
- The data code of the movie will reflect the date and time it has been recorded on the memory card.
- Recording stops at blank sections or recordings in different audio mode (12bit/16bit).
|
Screen Displays during Movie Recording