Recording Movies on a Memory Card ZR600 and ZR700
Article ID: ART124650 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Recording Movies on a Memory Card ZR600 and ZR700

Solution

Recording Movies on a Memory Card ZR600/700


Recording from a Tape in the Camcorder

Screen Displays during Movie Recording

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie recorded on a memory card will be monaural.

  1. Set the <TAPE/CARD> switch to <CARD>.
  2. Press the start/stop button to begin recording.
  3. Press the start/stop button to stop recording.
  • Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. Doing so could result in data damage.
  • When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.
  • Do not load/unload a cassette during recording.
  • We recommend using a Canon SD Memory Card, or a SD Memory Card with a transfer rate of more than 2 MB/sec., right after you have formatted it with this camcorder. With memory cards not formatted with this camcorder, or when recording/erasing has been repeatedly performed, the writing speed may be lower and recording may stop.
  • You can select the focusing point when recording a movie on the memory card.
  • Users of Windows XP: When you plan to connect the camcorder to a computer, keep the length of one movie shorter than approx. 12 min. in 320 x 240 and 35 min. in 160 x 120.

Recording from a Tape in the Camcorder

  1. Play back the tape.

  2. Press the start/stop button when the scene you wish to record appears.

  3. Press the start/stop button to stop recording.
  • When recording from a tape in the camcorder or other video devices:
    • A movie recorded from an image in widescreen mode will be vertically compressed.
    • The data code of the movie will reflect the date and time it has been recorded on the memory card.
    • Recording stops at blank sections or recordings in different audio mode (12bit/16bit).

Screen Displays during Movie Recording

SIMS Doc Id

0