Clean The Paper Feed Rollers S300 / S330

Article ID: ART124661 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Instructions how to clean the paper feed rollers


Clean The Paper Feed Rollers

If the paper feed rollers become dirty, they may not be able to properly feed paper due to the feed roller's slippage.

If paper does not feed correctly, perform the following to clean the paper feed rollers:

  1. Confirm that the printer is powered on.

  2. Remove any paper from the printer.

  3. Press and hold the <Resume/Cancel> button, and then release the <Resume/Cancel> button after the Power lamp blinks three times.

    Note: The Power lamp will blink and the paper feed roller starts cleaning itself by revolving.

  4. When the Power lamp light is green, repeat Steps 4 and 5 up to two additional times. (Please wait approx. 30 seconds for paper feed roller cleaning to complete.)

  5. To confirm whether cleaning has been performed properly, set a blank sheet of plain paper (8 1/2 x 11 Letter size) in the sheet feeder.

  6. Press and hold the <Resume/Cancel> button and release it when the Power lamp blinks three times. (The paper set in the printer is picked up and fed.)

  7. Repeat the process as necessary.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments