Reseat the Print Head S300 / S330

Article ID: ART124694 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Reseat the Print Head


Untitled Document

How to reseat the print head

  1. Check that the printer is powered on, and open the front cover. The print head will move to the left from the right.

  2. After confirming the print head moves to the left, hold and slowly move the print head lock lever up and down several times.

    Note: Holding the print head may cause it to not be seated properly. Perform this step using only the print head lock lever.

  3. Close the front cover.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments