Loading the film - Sure Shot 115u II

Article ID: ART124750 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Loading the film - Sure Shot 115u II


Loading the film - Sure Shot 115u II

1) Open the back cover and load the film

Push the back cover release lever down

2) Position the film correctly between the film guides

3) Pull the film out to the (film leader position indicator).

  • Make sure that there is no slack in the film when you pull it out.
  • If the edge of the film leader goes beyond the film leader position 4 indicator, rewind some of the film back into the cartridge.
4) Close the back cover.
  • The film automatically winds on to the first frame and "1" appears on the frame counter.
  • If the frame counter shows a blinking "0". the film did not load correctly. Load the film again.
DX-coded film is recommended.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments