Installing the battery PowerShot SD30 and SD40

Article ID: ART125004 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Installing the battery PowerShot SD30 and SD40


Installing the Battery Pack

Install Battery Pack NB-4L (supplied) as shown below.

Please recharge the battery pack before you use it for the first time.
  1. Slide the battery cover/SD card slot in the direction of the arrows.

  2. Press the battery lock while inserting the battery pack all the way in until the lock clicks. Insert the battery pack correctly by aligning the arrows on the camera and the battery pack. To remove the battery pack, press the battery lock and pull the battery pack out.
    - Align the on the battery pack and battery chamber and insert it correctly.

  3. Slide the battery cover/SD card slot closed.

  • Please watch the loading slot area carefully as you insert and remove the battery pack.
  • Do not turn off the power or open the battery cover while the camera's indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card.
  • Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may reset to the default settings if the battery pack has been removed for more than three weeks.
Please use an AC Adapter Kit CA-DC20 (sold separately) for extended use of the camera.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments