Printer Properties - Page Selection Tab

Windows Server 2003 is only supported on the imageCLASS D800 series.

Custom Paper Size...
Overlay

This printer driver supports three custom paper sizes. Using the custom forms defined on the [Forms] tab in the print server's [Properties] dialog box, you can add information about the custom paper sizes. Form definitions must conform to the printer's specifications.


Selected Paper dialog box gives you to the ability to define up to three custom paper sizes (Size 1, 2, & 3). Select the size and click the [Change Paper...] button.

Change Paper opens the [Available Paper] dialog box. This dialog box contains the definition for the sizes you have defined in the [Print Server Properties]. Only paper sizes that are supported by your printer will be available in this dialog box. Paper size can range in height from 5" to 14" (127mm to 355.6mm), width 3" to 8.5" (76.2mm to 215.9mm), and must have a minimum of 0.2" (5mm) margin on all sides. You can select either [Millimeter] or [Inch] to switch the unit of measurement displayed on the screen.

When you choose a size in the list and click [OK], the size information is copied to the selected paper size you selected on the [Selected Paper] list in the [Paper Selection] tab.
top

Setting up Custom Paper Sizes

The following procedure explains how to setup a custom paper size.

1. Click [Start], [Settings], [Printers] (on Windows XP/Server 2003, [Printers and Fax]).
   
   
2. Open the [File] menu and select [Server Properties].
   
   
   
3. Check the [Create a New Form] box on the [Form] tab in the [Print Server Properties] dialog box.
   
   
4. Type a name for your setup in the [Form Description for] box.
   
   
5. Select [Metric] or [English].
   
   
6. Enter the values for [Width] 5" to 14" (127mm to 355.6mm), [Height] 3" to 8.5" (76.2mm to 215.9mm), and [Printer Area Margins] a minimum of 0.2" (5mm).
   Be sure to designate values such that the height is equal to or greater than the width.
   
   
7. Click [Save Form].
   
   
   Be sure to enter all the values required in Step 6. Repeat the Steps 3 to 7 to setup more custom paper sizes.
   top