Changing Toner Supply Low Settings-IC D880/780/680/PC 1080F

Article ID: ART125208 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Changing Toner Supply Low Settings


Changing "Toner Supply Low" Settings

To change the 'Toner Supply Low" settings, follow the procedures below. If you set [TONER SUPPLY LOW] to [KEEP PRINTING], the machine will continue to print faxes until there is no toner remaining in the black cartridge (regardless of quality).

  1. Press <Menu>.

  2. Use < > or < > to select [FAX SETTINGS].

  3. Use < > or < > to select [PRINTER SETTINGS].

  4. Use < > or < > to select [TONER SUPPLY LOW].

  5. Use < > or < > to select the settings you want.
    You can select from the following:

    -[RX TO MEMORY] (Sends the faxes to memory and stores them until the toner cartridge is changed).
    -[KEEP PRINTING] (Unit will continue to print until the black toner cartridge is empty)

  6. Press <Set>.

  7. Press <Stop/Reset> to return to the standby mode.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments