How do I install the Canon Digital Camera Solution Software in Windows 95/98/Me/NT 4.0/2000
Canon digital cameras shipped with any of several versions of the Canon Digital Camera Solutions Disk, the intent being to provide the most current software available at the time the camera was packaged. In order to provide the most accurate answer to your question, read the label of your Canon Digital Camera Solutions Disk, and click on the matching version.
Version 1.0, Version 2.0 or Version 3.0
Version 4.0 or Version 5.0
Version 6.0
Version 7.0 or Version 7.1
Version 1.0, Version 2.0 or Version 3.0
Note: If you are installing the software onto Windows NT 4.0 or Windows 2000, you must first log on as the administrator and then install the software.
- Close any programs that are running.
- Place the Canon Digital Camera Solution Disk in the CD-ROM drive. Setup starts automatically.
- If setup does not automatically start, click on the Start button on the Windows taskbar and choose Run. Type X:\Setup (where "X" is the drive letter of your CD-ROM drive). Click OK.
- Click Software Installation.
- Select the install location and click Next.
- Select the software you wish to install and follow the on-screen instructions to proceed.
- Click Finish when the installation is complete and the installer panel appears again.
Version 4.0 or Version 5.0
Note: If you are installing the software onto Windows NT 4.0 or Windows 2000, you must first log on as the administrator and then install the software.
Precaution: Ensure that you install the software from the Canon digital Camera Solution Disk onto the computer before you attach the camera to the computer's USB port. If you attach the camera to the USB port after installing the software, it will automatically select the correct USB driver.
- Close any programs that are running.
- Place the Canon Digital Camera Solution Disk in the CD-ROM drive. The installer panel will automatically display.
- If the installer panel does not automatically display, use the following procedures to start it.
- Double-click the My Computer icon on the desktop, and double-click the CD-ROM icon in the next window.
- Double-click the Setup icon.
- Click Software Installation.
- Select the install location and click Next.
- Select the software you wish to install and follow the on-screen instructions to proceed.
- Click Finish when the installation is complete and the installer panel appears again.
Version 6.0
Note: If you are installing the software onto Windows 2000, you must first log on as the administrator and then install the software.
Precaution: Ensure that you install the software from the Canon Digital Camera Solution Disk onto the computer before you attach the camera to the computer's USB port. If you attach the camera to the USB port after installing the software, it will automatically select the correct USB driver.
- Close any programs that are running.
- Set the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. The installer panel will display automatically.
- If the installer panel does not appear automatically, use the following procedures to display it.
- Double-click the My Computer icon on the desktop to open it and double-click the CD-ROM icon in the next window.
- Double-click the Setup icon.
- Click Software Installation.
- Confirm the target folder for the installation and click the Next button.
- Select the programs you wish to install and click the Next button. A check mark should appear beside the programs that will be installed.
- Confirm the program selection and click the Next button.
- After the installation is complete and the installer panel displays again, click Exit button.
Version 7.0 or Version 7.1
Note: If you are installing the software onto Windows 2000 or Windows XP Professional, you must first log on as the administrator and then install the software.
Precaution: Ensure that you install the software from the Canon Digital Camera Solution Disk onto the computerbefore you attach the camera to the computer's USB port. If you attach the camera to the USB port after installing the software, it will automatically select the correct USB driver.
- Close any programs that are running.
- Set the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. The installer panel will display automatically.
- If the installer panel does not appear automatically, use the following procedures to display it.
- Double-click the My Computer icon on the desktop to open it and double-click the CD-ROM icon in the next window.
- Double-click the Setup icon.
- Click Software Installation.
- Confirm the target folder for the installation and click the Next button.
- Select the programs you wish to install and click the Next button. A check mark should appear beside the programs that will be installed. (Note: If you are using Windows Me or Windows XP, you should see the USB WIA (Windows Imaging Acquisition) Driver on the program list. If using Windows 98 or Windows 2000, you should see the USB Twain Driver listed.)
- Confirm the program selection and click the Next button.
- After the installation is complete and the installer panel displays again, click Exit button.
