Adjusting the lamp shut off time (4200F)

Article ID: ART125695 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Adjusting the lamp shut off time (4200F)


Adjusting the Lamp Shut Off Time (4200F)

  1. Access ScanGear from the desired application (ex. - PhotoStudio).
  2. If not already in Advanced Mode, then click on the 'Advanced Mode' button.
  3. Click on the 'Settings' tab.
  4. Click on the 'Preferences' button. This brings up the 'Preferences' window.
  5. Click on the 'Scanner' tab.
  6. The Shut Off Lamp Time can be set from 4 to 56 in 4-minute increments.
    4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments