Making copies-IC D300 Series
Article ID: ART125747 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Making copies

Solution

Making copies

Acceptable Orignals

Platen Glass

ADF (D340 only)

Type of Document -Plain Paper
-Thick Documents
-Photographs
-Small documents (e.g., index cards)
-Special types of paper (e.g., tracing paper*1 , transparencies*1 , etc.)
-Book
-Plain paper (multiple page documents of the same size, thickness, and weight or one page documents)
Size (W x L) D340: Max. Letter size (8 1/2" x 11") (216 mm x 356 mm)
D320: Max. Legal size (8 1/2" x 14") (216 mm x 356 mm)
Max. 8.5" x 14"
(Max. 216 mm x 356 mm)
Min. 5 7/8" x 4 1/8"
(Min. 148 mm x 105 mm)
Quantity 1 sheet Max. 50 letter- or A4-size sheets*2
Max. 30 legal-size sheets*2
Weight Max. 4.4 lb (2 kg) 17 lb to 28 lb (64 g/m2 to 105 g/m2 )


  1. Prepare the document and load it face up in the ADF* or place it face down on the platen glass.
    * Only for the imageCLASS D340.

  2. Set the copy features if you wish. You can set the features below.
    Copy quantity
    Enlarging/reducing
    Image quality
    Exposure
    Collate
    2 on 1
    Please note that you cannot change settings during copying.

  3. Press <Start> to begin copying.

    If the paper in the cassette or multi-purpose tray runs out during copying, the LCD displays [SUPPLY REC. PAPER]. Load paper in the cassette or load paper in the multi-purpose tray. When paper is loaded, the machine automatically resumes copying.
    If you load paper while making copies, do not load a different paper size.
    You can reserve the next copy job while the machine is outputting copies.
    After the machine finishes copying, the setting will remain. However, if you press <Stop/Reset> or if no key is pressed for two minutes, they will be reset to the default settings. (The time until the machine enters the [AUTO CLEAR] mode can be specified.
    The capacity of the output tray is 50 sheets (80 g/m2 ) of paper. To prevent paper jams, remove paper from the output tray before the count reaches 50.

SIMS Doc Id

0