Repacking and Transporting Your Machine

Be sure to unplug the power cord before transporting the machine. If the machine is likely to be subjected to vibration (e.g., when transporting over long distances), the follow precautions should be taken. If you do not follow these precautions, the machine may be damaged or the quality of your copy images may be adversely affected.

1. Unplug the power cord.
   
   
2. If the machine is connected to a PC, remove the PC (USB) cable.
   
   
3. Open the right cover.
   
   
4. Grip the end of the cartridge, and remove it from the machine. In order to avoid direct sunlight, put the removed cartridge in the protective bag that the cartridge was in when you purchased it.
   
   
5. Remove the document feeder tray^*.
   
   
6. Remove the cassette and multi-purpose tray.
   
   
7. Close the right cover.
   ^* Only for the imageCLASS D340 model

Carrying the machine by the sides

Remove the cassette, the multi-purpose tray and the document feeder tray^*.

Grip the handles on the sides of the machine and lift up the machine, as shown in the illustration above.

When carrying this machine, be sure to hold it in the designated places as shown in the illustration. Dropping the machine can cause personal injury.

Transporting the machine by car

Pack the machine, using the original packing material and box.

Place the machine on a level, stable surface.

		Do not leave the machine inside a car for a long period of time; the temperature can become very high or low.
		Avoid rough roads; excessive vibration may damage the machine or adversely affect the quality of your copy images.
		Place a cover over the machine. Do not leave the machine in direct sunlight.
		When moving the machine, use the original shipping box that it was packed in when you purchased it.
		When using the original shipping box, do not place the power cord or other objects on the ADF*; this may damage the ADF*.

^* Only for the imageCLASS D340 model