If your documents have black streaks or appear dirty after copying them using the ADF, this may be caused by pencil lead rubbing off the documents and onto the roller. Clean the ADF scanning area, film, and roller.
Turn off the main power switch and disconnect the power cord.
Open the ADF.
Clean the rollers (A) inside the ADF with a cloth dampened with water. Then wipe the area with a soft, dry cloth.
Do not dampen the cloth too much, as this may tear the document or damage the machine.
Lift the document feeder tray.
Clean the rollers (B) below the document feeder tray with a cloth dampened with water. Then wipe the area with a soft, dry cloth.
Lower the document feeder tray.
Be careful not to get your fingers caught.
Close the ADF.
Be careful not to get your fingers caught.
Open the platen glass cover.
Clean the ADF scanning area (on the left side of the platen glass) and the document feeding roller with a cloth dampened with water. Then wipe the area with a soft, dry cloth.
Close the platen glass cover.
Be careful not to get your fingers caught.
Reconnect the power cord and turn on the main power switch.
