Ask a Question

Setting the Power Save timer MP500

Article ID: ART126161 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Setting the Power Save timer on the machine.

Solution

Untitled Document

Power Save Setting

Instructions to change the settings on the machine.

  1. Press the <Menu> button.

  2. Use the right or left cursor to select [Maintenance / settings], then press <OK>.

    Note: This procedure is skipped if your machine is in Scan mode. Proceed to step 3.

  3. Use the right or left cursor to select [Device settings], then press <OK>.

  4. Use the up or down cursor to select [Other settings] (item <4>), then press <OK>.



  5. Use the up or down cursor to select [Power save setting] (item <3>), then press <OK>.



  6. Use the up or down cursor to select [5 Minutes], [15 Minutes], [1 hour] or [8 hours] then press <OK>.


SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments